DOE Flamingo - Drinking water on stock

Download leaflet 

DOE Flamingo is a device that produces chilled water, perfect for drinking. The most crucial stage of water treatment process here is based on Reverse Osmosis technology. The unit is very cost effiective, since it does not waste water. Rejected water from membranes, returns to the tank.

During the purification process, the water flows through several treatment devices. First, it has to go through the UV disinfection unit. Next, it needs to be filtered with active carbon. This is crucial for RO membranes protection. After that it reaches the main stage of the treatment, which is RO filtering. Then, some water gets rejected and returns to the tank. The product though, goes through DOE Penguin, responsible for cooling process. This device is based on ecological Peltier technology. It does not require any refrigerantes nor maintenance. After cooling process, the water gets remineralized and filtered with active carbon again. Finally - the product is ready and goes to the dispenser. Some of it is gathered in compensation tank, from where, if necessary, the circulation pump redistributes it.

Technical data:
- required inlet pressure: 2-8 bar
- incoming water flow: 3 t/day, product: 1,5 T/day
- power: 250 W
- compensation tank capacity: 12 l
- power supply: 220V 50Hz or 240V 60Hz
- weight: 100kg

LCP features:
- circulation pump siwtch
- product conductivity meter
- cooling indication
- uv lamp work indication

Construction:
- 1x circulation pump
- 1x UV disinfection unit in SS316 chamber
- 2x active carbon filter in SS316 housing
- 1x minelarizer in SS316 housing 
- 1x SS316 compensation tank 
- 1x peltier cooler in SS304 housing
- 1x dispenser

DOE Manta - R21 + on stock

Download leaflet 

DOE Manta is a robust marine high pressure cleaner. Mobile execution gives you a powerful tool for number of cleaning jobs from cleaning floors to removing paint and rust. Proven construction enables you to work continuously with maximum parameters.

The most important part of the device is High Pressure pump mounted on a portable frame. The unit is equipped with a set of wheels, for easy operation. All components that may need replacing, are easily accessible. DOE Manta is delivered with all necessary control instruments, valves and a small local control panel. DOE also provide HP hose connected to the lance and a dedicated nozzle.

Technical data:
– max. working pressure: 185 bar
- nominal capacity: 21l/min
– max. inlet temperature: 65 deg
- power installed: 7,5 kW
– power supply: 3x400V 50Hz
- weight: 77kg

LCP features:
- main switch
- supply voltage current indicator

Construction:
- 1x portable frame
- 1x set of wheels
- 1x HP pump with motor
- 1x pressure regulation valve
- 1x small control panel (black steel powder painted)
- 1x set of HP hose with connections, spray gun and lance

DOE provides commissioning and maintenance services globally.

DOE Manta - B41-O50 on stock

Download leaflet 

DOE Manta is a robust marine high pressure cleaner. Mobile execution gives you a powerful tool for number of cleaning jobs from cleaning floors to removing paint and rust. Proven construction enables you to work continuously with maximum parameters.

The most important part of the device is High Pressure pump mounted on a portable frame. The unit is equipped with a set of wheels, for easy operation. All components that may need replacing, are easily accessible. DOE Manta is delivered with all necessary control instruments, valves and a small local control panel. DOE also provide HP hose connected to the lance and a dedicated nozzle.

Technical data:
– max. working pressure: 160 bar / 50 Hz;  180 bar / 60 Hz
- nominal capacity: 41l/min / 50 HZ ; 50l/min / 60 HZ
– max. inlet temperature: 65 deg
- power installed: 15 kW / 50 HZ ; 18 kW / 60 HZ
– power supply: 3x400V 50Hz ;  3x440V 60Hz
- weight: 180kg

LCP features:
- main switch
- supply voltage current indicator
- protection against dry running

Construction:
- 1x portable frame
- 1x set of wheels
- 1x HP pump with motor
- 1x pressure regulation valve
- 1x control panel (black steel powder painted)
- 1x flow sensor
-1x pressure gauge
- 1x set of HP hose with connections, spray gun and lance

DOE provides commissioning and maintenance services globally.

DOE Manta - R21 on stock

Download leaflet 

DOE Manta is a robust marine high pressure cleaner. Mobile execution gives you a powerful tool for number of cleaning jobs from cleaning floors to removing paint and rust. Proven construction enables you to work continuously with maximum parameters.

The most important part of the device is High Pressure pump mounted on a portable frame. The unit is equipped with a set of wheels, for easy operation. All components that may need replacing, are easily accessible. DOE Manta is delivered with all necessary control instruments, valves and a small local control panel. DOE also provide HP hose connected to the lance and a dedicated nozzle.

Technical data:
– max. working pressure: 155 bar
- nominal capacity: 21l/min
– max. inlet temperature: 65 deg
- power installed: 6,3 kW
– power supply: 3x400V 50Hz
- weight: 77kg

LCP features:
- main switch
- supply voltage current indicator

Construction:
- 1x portable frame
- 1x set of wheels
- 1x HP pump with motor
- 1x pressure regulation valve
- 1x small control panel (black steel powder painted)
- 1x set of HP hose with connections, spray gun and lance

DOE provides commissioning and maintenance services globally.

DOE Pelican - Medium M30 on stock

Download leaflet 

Pelican is a desalinator, based on the Revered Osmosis technology. It allows to produce potable water out of sea water. The incoming water can be taken from various salt water sources.

It is a compact device easy to operate and maintenance. It does not require much space. All componets that may need replacing, are easily accessible. The main step of DOE Pelican is the RO system that stops particles (suspended) and dissolved chemicals. Before the water flows through the RO membranes, it is pre-filtrated with disc filter and polypropylene multicartridge filter (consumable). All componets are mounted on a common stainless steel frame. The device is equipped with HP and feed pump, all necessary control instruments, valves and the local control panel.

Technical data:
– total membranes area: 64 m2
– flow in: 77 m3/day
- product (for 25°C water): 30 m3/day
– max. working pressure: 60 bar
– power supply: 3x400V 50Hz or 3x440V 60Hz
- power installed: 7,3 kW

LCP features:
- HP pump start/stop
- feed pump start/stop
- positive pressure indication (pressure switch as protection - when the incoming pressure is too low)
- incoming water and product salinometers
- emergency stop

Construction:
- 1x SS304 frame (powder painted)
- 1x feed pump with motor (non self priming)
- 1x HP pump with motor
- 1x local control panel (black steel powder painted)
- 1x dics filter 100 microns
- 1x multicartridge polypropylene filter 5x5 microns
- 1x set of PP piping
- 1x set of SS and PP valves
- 1x set of instruments with necessary tubing

DOE provides commissioning and maintenance services globally.

DOE Pelican - Small S10 L4 on stock

Download leaflet 

Pelican is a desalinator, based on the Revered Osmosis technology. It allows to produce potable water out of sea water. The incoming water can be taken from various salt water sources.

It is a compact device, easy to operate and maintain. It does not require much space. All components that may need replacing, are easily accessible. The main step of DOE Pelican is the RO system that stops particles (suspended) and dissolved chemicals. Before the water flows through the RO membranes, it is pre-filtrated with polypropylene multicartridge filter (consumable). All components are mounted on a common stainless steel frame. The device is equipped with HP and feed pump, all necessary control instruments, valves and the local control panel.

Technical data:
– total membranes area: 32m2
– flow in: 30 m3/day
- product (for 25°C water): 7 m3/day
– max. working pressure: 60 bar
– power supply: 3x440V 60Hz / 3x400V 50Hz
- power installed: 2,5kW

LCP features:
- HP pump start/stop
- feed pump start/stop
- positive pressure indication (pressure switch as protection - when the incoming pressure is too low)
- product salinometer

Construction:
- 1x SS304 frame (powder painted)
- 1x feed pump with motor
- 1x HP pump with motor
- 1x local control panel (black steel powder painted)
- 1x multicartridge polypropylene filter 5x5 microns
- 1x set of PP piping
- 1x set of SS and PP valves
- 1x set of instruments with necessary tubing

DOE provides commissioning and maintenance services globally.

DOE Pelican - Small Slim S4 S2 on stock

Download leaflet 

Pelican is a desalinator, based on the Revered Osmosis technology. It allows to produce potable water out of sea water. The incoming water can be taken from various salt water sources.

It is a compact device easy to operate and maintenance. It does not require much space. All components that may need replacing, are easily accessible. The main step of DOE Pelican is the RO system that stops particles (suspended) and dissolved chemicals. Before the water flows through the RO membranes, it is pre-filtrated with polypropylene single cartridge filter (consumable). All components are mounted on a common stainless steel frame. The device is equipped with HP and feed pump, all necessary control instruments, valves and the local control panel.

Technical data:
– total membranes area: 6,5 m2
– flow in: 30 m3/day
- product (for 25°C water): 4 m3/day
– max. working pressure: 60 bar
– power supply: 3x440V 60Hz / 3x400V 50Hz
- power installed: 2,5kW

LCP features:
- HP pump start/stop
- feed pump start/stop
- positive pressure indication (pressure transducer as protection - when the incoming pressure is too low)
- product salinometer
- pressure indicators

Construction:
- 1x SS304 frame (powder painted)
- 1x feed pump with motor
- 1x HP pump with motor
- 1x local control panel (black steel powder painted)
- 1x single cartridge polypropylene filter 5 microns
- 1x set of PP piping
- 1x set of SS and PP valves
- 1x set of instruments with necessary tubing

DOE provides commissioning and maintenance services globally.

DOE Pelican - Small S7 S4 on stock

Download leaflet 

Pelican is a desalinator, based on the Revered Osmosis technology. It allows to produce potable water out of sea water. The incoming water can be taken from various salt water sources.

It is a compact device, easy to operate and maintain. It does not require much space. All components that may need replacing, are easily accessible. The main step of DOE Pelican is the RO system that stops particles (suspended) and dissolved chemicals. Before the water flows through the RO membranes, it is pre-filtrated with polypropylene multicartridge filter (consumable). All components are mounted on a common stainless steel frame. The device is equipped with HP and feed pump, all necessary control instruments, valves and the local control panel.

Technical data:
– total membranes area: 13m2
– flow in: 30 m3/day 
- product (for 25°C water): 7 m3/day
– max. working pressure: 60 bar
– power supply: 3x440V 60Hz / 3x400V 50Hz
- power installed: 2,5kW

LCP features:
- HP pump start/stop
- feed pump start/stop
- positive pressure indication (pressure switch as protection - when the incoming pressure is too low)
- product salinometer

Construction:
- 1x SS304 frame (powder painted)
- 1x feed pump with motor
- 1x HP pump with motor
- 1x local control panel (black steel powder painted)
- 1x multicartridge polypropylene filter 5x5 microns
- 1x set of PP piping
- 1x set of SS and PP valves
- 1x set of instruments with necessary tubing

DOE provides commissioning and maintenance services globally.

DOE Pelican - Samll S7 L2 on stock

Download leaflet 

Pelican is a desalinator, based on the Revered Osmosis technology. It allows to produce potable water out of sea water. The incoming water can be taken from various salt water sources.

It is a compact device, easy to operate and maintain. It does not require much space. All components that may need replacing, are easily accessible. The main step of DOE Pelican is the RO system that stops particles (suspended) and dissolved chemicals. Before the water flows through the RO membranes, it is pre-filtrated with polypropylene multicartridge filter (consumable). All components are mounted on a common stainless steel frame. The device is equipped with HP and feed pump, all necessary control instruments, valves and the local control panel.

Technical data:
– total membranes area: 16m2
– flow in: 30 m3/day 
- product (for 25°C water): 10 m3/day
– max. working pressure: 60 bar
– power supply: 3x440V 60Hz / 3x400V 50Hz
- power installed: 2,5kW

LCP features:
- HP pump start/stop
- feed pump start/stop
- positive pressure indication (pressure switch as protection - when the incoming pressure is too low)
- product salinometer

Construction:
- 1x SS304 frame (powder painted)
- 1x feed pump with motor
- 1x HP pump with motor
- 1x local control panel (black steel powder painted)
- 1x multicartridge polypropylene filter 5x5 microns
- 1x set of PP piping
- 1x set of SS and PP valves
- 1x set of instruments with necessary tubing

DOE provides commissioning and maintenance services globally.

DOE Seahorse - A on Stock

Download leaflet 

Seahorse is a UV disinfection constant flow device. Water flows through the vessel and is treated with UV light. This process causes photochemical reaction that damages the DNA of microorganisms, which results in their disintegration. Seahorse provides effective bacteriological protection of treated water.

Main component of the unit is a pressure vessel with UV lamp mounted inside. To make sure, that the process is not disrupted and the water is flowing through the device, without being disinfected, we provide reliable electromagnetic valve which is controlled by digital meter and opens only when the radiation is at sufficient level.

Technical data:
– max. flow clean/dirty water: 6/4,2 m3/h
– working pressure: 10 bar
- total UVC radiation 26 W
- power: 100 W
– UVC intensity: min. 400 J/m2
– power supply: 220V 50Hz or 240V 60Hz
- volume: 5 l
- weight: 35kg

LCP features:
- UVC meter 
- hour counter
- low uv and unit failure alarms
- work and power supply indicators
- buzzer
- ammeter

Construction:
- 1x SS316L chamber
- 1x UVC sensor
- 2x UV lamps with quartz sleeves
- 1x local control panel (black steel powder painted)
- 1x set of SS valves

DOE provides commissioning and maintenance services globa

DOE Seahorse - B on stock

Download leaflet 

DOE Seahorse is a UV disinfection constant flow device. Water flows through the vessel and is treated with UV light. This process causes photochemical reaction that damages the DNA of microorganisms, which results in their disintegration. DOE Seahorse provides effective bacteriological protection of treated water.

Main component of the unit is a pressure vessel with UV lamp mounted inside. To make sure, that the process is not disrupted and the water is flowing through the device, without being disinfected, we provide reliable electromagnetic valve which is controlled by digital meter and opens only when the radiation is at sufficient level.

Technical data:
– max. flow clean/dirty water: 10/7 m3/h
– working pressure: 10 bar
- total UVC radiation: 39 W
- power: 150 W
– UVC intensity: min. 400 J/m2
– power supply: 220V 50Hz or 240V 60Hz
- volume: 8 l
- weight: 35kg

LCP features:
- UVC meter 
- hour counter
- low uv and unit failure alarms
- work and power supply indicators
- buzzer
- ammeter

Construction:
- 1x SS316L chamber
- 1x UVC sensor
- 3x UV lamps with quartz sleeves
- 1x local control panel (black steel powder painted)
- 1x set of SS valves

DOE provides commissioning and maintenance services globally.

DOE Seahorse - C on stock

Download leaflet 

DOE Seahorse is a UV disinfection constant flow device. Water flows through the vessel and is treated with UV light. This process causes photochemical reaction that damages the DNA of microorganisms, which results in their disintegration. DOE Seahorse provides effective bacteriological protection of treated water.

Main component of the unit is a pressure vessel with UV lamp mounted inside. To make sure, that the process is not disrupted and the water is flowing through the device, without being disinfected, we provide reliable electromagnetic valve which is controlled by digital meter and opens only when the radiation is at sufficient level.

Technical data:
– max. flow clean/dirty water: 50/35 m3/h
– working pressure: 10 bar
- total UVC radiation - 108 W
- power: 400 W
– UVC intensity: min. 400 J/m2
– power supply: 220V 50Hz or 240V 60Hz
- volume: 49 l
- weight: 70kg

LCP features:
- UVC meter 
- hour counter
- low uv and unit failure alarms
- work and power supply indicators
- buzzer
- ammeter

Construction:
- 1x SS316L chamber
- 1x UVC sensor
- 2x UV lamps with quartz sleeves
- 1x local control panel (black steel powder painted)
- 1x set of SS valves

DOE provides commissioning and maintenance services globally.

DOE Seal - 1000L on stock

Download leaflet 

DOE Seal is a marine sanitary hot water heater (water calorifier). Every ship has a demand for sanitary hot water. By choosing DOE SEAL you will get a peace of mind due to the simple and trusty construction. Double thermostat and safety valve meets triple safety demand. In order to preserve the power drain you may consider connecting your steam source or waste heat from the engine to the calorifier. This solution will give you more options during daily use and maintenance works.

The heater consists of a tank which comes with desired marine certificate. DOE Seal is used for heating the water by electric heaters, external heat exchanger or using stainless steel coil, which is available as an option.

Technical data:
- LLoyd Register Certificate
– tank volume: 1000 l
– working pressure: 6 bar
– design pressure 6,6 bar
– material: Stainless Steel 1.4404 AISI 316L
–  Weight dry/wet: 500 kg / 1500 kg

Coil Heating (possibility): 
Medium: suitable for heating water and steam
Inlet/Outelet: DN25
Power: dependent on heating parameters

Electrical Box:
- Power Supply 3x400V 50 Hz / 3x440V 60Hz
- Electric Heating: 15 kW / 400 V ; 18 kW / 440 V
- Support Circulation Pump
-IP56


Scope of Supply:
- Insulation 50mm - Rockwool
- 2x Incoly heating
- 2x Pressure Gauge
- 1x Circulation Pump
- 1x Thermometer
- 2x Thermostats
- 1x Safety Valve
- Drain Valve.
- Inlet/Outlet connection with valves
- 1x Coil regulation equipment
DOE provides commissioning and maintenance services globally.

DOE Shark - 200L on stock

Download leaflet 

DOE Shark group of products are tanks for water storage. It could be used for water hydrophore after additional certification.

DOE provides custom made executions of the water tanks. Our experienced project management team will assist you during the project specification stage and will help you with choosing the right parameters of our devices. After determining the overall technical requirements, the project is handed to our design department. We have plenty of experience with executions, that have to meet strict BV, DNV, RMRS, RRR, RINA, LLOYD requirements. You can be sure that ordered device will be designed according to your needs. Tanks are made in P355GH/P235GH or AISI316L material with desired finish (galvanising, paining etc...). Our own design department calculates and prepares working drawings for every tank and internal certified personnel takes care of Visual Tests and Quality Approvals after welding. Additionally tanks can be equipped with control and measurement instruments, as well as pressure safety valve and set of regular valves.

Technical data:
- DNV certificate for water / to use with water and air it can be re-certificate
– tank volume: 200 l
– working pressure: 5 bar
– design pressure 6 bar
– material: Stainless Steel 1.4404 ( AISI 316L)
– Surface: Sandblasted and pasivated
–  Weight dry/wet: 110 kg / 310 kg


DOE provides commissioning and maintenance services globally.

DOE Stork - Small T48 on stock

Download leaflet 

Stork is an “ultra clean” water maker, based on the Revered Osmosis technology. The incoming water can be taken from various fresh water sources. An example can be water from well, river or the lake. It’s salinity should not exceed 3000 ppm (recommended 1000 ppm or less).

It’s a compact device easy to operate and maintenance. It does not require much space. All components that may need replacing, are easily accessible. The main step of Stork is the RO system that stops particles (suspended) and dissolved chemicals. Before the water flows through the RO membranes, it is pre-filtrated with disc filter (automatic back-flush) and polypropylene single cartridge filter (consumable). All components are mounted on a common stainless steel frame. The device is equipped with feed pump, circulation pump, all necessary control instruments, valves and the local control panel. The device is automatic. It does not require setting. Timed valves control the operation of the device

Technical data:
– total membranes area: 13m2
– flow in: 43m3/day
(Depends on the incoming water quality and the desired product water quality.)
- product (for 25°C water): 3 m3/day
– working pressure: 10 bar
– power supply: 3x230V 50Hz or 3x230 60 Hz
- power installed: 1,6kW

LCP features:
- product conductivity meter
- feed pump start/stop (with work indication)
- circulation pump start/stop (with work indication)
- voltage and current meter
- pressure switch on indication
- backflush indication

Construction:
- 1x feed pump with motor
- 1x circulation pump with motor
- 1x local control panel (black steel powder painted)
- 1x automatic dics filter 100 microns 
- 1x single cartridge polypropylene filter 5 microns
- 1x set of instruments with necessary tubing

DOE provides commissioning and maintenance services globally.

DOE Swan - Micro 21Kw on stock

Download leaflet 

DOE Swan Micro is an electric constant flow (tankless) heater for marine use.

Designed to be compact and adapted for marine applications with stainless steel 316L piping and small mounting plate. DOE Swan is designed to be customizable on your request - you can choose the power and type of heating. Very compact frame and small size make it easy to fit DOE Swan Micro even in smallest machinery room. Vertical heater placement decreases maintenance space even more and is very easy to maintain. To reduce the regular constant flow heater dimensions, we changed regular instruments for heating elements with inbuilt microprocessor temperature controllers.

Technical data:
– power: 21kW
– number of heaters: 3
– medium: Water
– Max water flow: 3 m3/h / dT 5°C
– Min water flow: 0,4 m3/h  dT 50°C
– Power Supply: 3x400V 50Hz

LCP features:
– heater switch
– circulation pump operation
– protection against heating during no flow


Construction:
– 1x Stainless steel AISI304 mounting plate (powder painted)
– 1x set of electric heaters with inbuilt protection and the temperature setting
– 1x local control panel (black steel powder painted)
– 1x safty valve 
– 1x set of Stainless stee AISI316L piping (other materials on request)

DOE provides commissioning and maintenance services globally.

DOE Turtle - 2000L - on stock

Download leaflet 

Hydrophore unit is used to maintain the pressure of the water supplied to the different parts of the ship at various heights. It allows to keep the constant pressure in lines at all levels of the ship. The equipment is suitable to distribute sanitary, technical, fresh and potable water.

DOE also provides custom made executions of the hydrophore. Our experienced project management team will assist you during the project specification stage and will help you with choosing the right parameters of our devices. After determining the overall technical requirements, the project is handed to our design department. We have plenty of experience with executions, that have to meet strict BV, DNV, RMRS, RRR, RINA, LLOYD requirements. You can be sure that ordered device will be designed according to your needs. We can deliver DOE Turtle executions of desired volume . You can also choose other power supply, as well as different tank and piping materials. Pump wise, we can offer version with: none, 1 or 2 pumps. DOE provides both non self-priming and self-priming pumps.

Technical data:
- LLoyd Register
– tank volume: 2000 l
– working pressure: 6 bar
– design pressure 6,6 bar
– material: P355GH
– Surface: Sandblasted and painted: epoxy coating
–  Weight dry/wet: 810 kg / 2810 kg

Electrical Box:
- Power Supply 3x400V 50 Hz / 3x440V 60Hz
- Support hydrophore Pump operation
- Manual/Automatic Mode
- Support DOE Seahorse operation - UV Steralizer - Additionaly 

Scope of Supply:
- Pressure Gauge
- Water Level Indicator
- Safty Valve
- Pressure Switche
- Compressed air inlet valve
- Drain Valve.
- Inlet/Outlet connection with valves
-Hydrophore pump - not Included